Soil Compaction Tester Product Support
Below are the support materials available for the Soil Compaction Tester.
A: The tester displays the reading in psi.
A: The soil compaction tester only reads out in psi. There is no conversion charts to other units of measure.
A: The ½ inch tip of the tester will test from 0-600 psi. The ¾ inch tip will test between 0- 400 psi.
A: The Soil Compaction tester has grooves every 3 inches to help determine depths of compaction zones.
A: No, the repair costs could exceed the cost of the instrument.
A: Yes, the clamp is used to protect the instrument in shipment.
A: On one side of the instrument is a circular hole with a screw inside remove the screw and add a couple of drops of hydraulic fluid.
A: As of the spring of 2005 we no longer used liquid filled gauges.